If you’re looking for an affordable way to access digital television content, GOtv is an excellent option. GOtv offers a wide range of local and international channels at an affordable price.
However, to access these channels, you’ll need to install your GOtv decoder and GOtenna correctly. If you’re not sure how to do this, don’t worry!
In this article, we’ll provide you with a step-by-step guide on how to install your GOtv decoder and GOtenna so that you can start enjoying all the content that GOtv has to offer.
How to install GOtv for the first time
- Connect the decoder to the TV using the voice and video cable provided
- Take the antenna outside and mount it temporarily
- Connect the Antenna to decoder using the cable that comes with the box
- Connect decoder to power using the power cable
- Power on and setup will begin automatically
- Select the language and allow time for the decoder to scan the available channels
- If it does not scan, adjust the outside antenna until the strength of the signal is strong enough
- When it is done scanning, that’s it!
How do I set up my GOtv antenna?
Without proper installation, you may experience weak signals, blurry images, or no signal at all.
This can be frustrating, especially if you have to deal with constant interruptions while trying to watch your favorite TV shows.
To set up your GOtv antenna, please follow these steps;
- Pull the cable through the middle of the antenna grid.
- Screw the cable onto the yellow plastic box of the antenna.
- Slide over the waterproof sleeve.
- Clip the green plastic box and the red plastic box on the antenna into the green plastic clip and the red plastic clip on the antenna grid, until they click. Green connects to green and red connects with red.
- Place the U bracket through the middle of the antenna.
- Place the first pole bracket over the U bracket with the flat side against the GOtenna grid.
- Place the outward facing pole bracket attached to the GOtenna grid against an upright pole. Make sure that the down arrow on the yellow box is pointing down and then fasten the second pole bracket around the pole using the wing nuts provided.
- Find a clear site that has no obstructions between the GOtenna and the signal transmitter. Point the GOtenna towards the transmitter. Slowly move your GOtenna to the left or the right until the strongest signal is found. You will be able to see this on the signal lever bar displayed on your TV. Then fix your GOtenna in its position.
How do I find my GOtv signal?
Like all TV services, GOtv reception can sometimes be disrupted by a weak or lost signal.
We will guide you through the process of finding your GOtv signal and offer some tips on how to improve your reception for a better viewing experience.
To find your GOtv signal, you can follow these steps;
1. Check your antenna
Ensure that your GOtv antenna is properly installed and pointing in the right direction.
Make sure it is mounted on a stable and high location with no obstacles blocking its line of sight to the nearest transmission tower.
2. Check your cables
Ensure that all cables connecting your GOtv decoder and TV are properly connected and in good condition.
3. Access the signal strength menu
Press the Menu button on your GOtv remote and select Advanced Options. Then select Installation, followed by “Signal Information” or Signal Strength.
4. Check the signal strength
The signal strength should be above 60% for good reception. If it’s lower than 60%, adjust your antenna until you get the optimal signal strength.
5. Rescan for channels
After adjusting the antenna, rescan for channels on your GOtv decoder to update the available channels.
6. Seek assistance
If you still have difficulty finding your GOtv signal, you can contact your service provider’s customer support for assistance.
FAQ
What do I need to install my GOtv decoder?
To install your GOtv decoder, you will need the decoder itself, the antenna (also known as a UHF aerial), a power source, an RCA cable, and a TV set.
What is the first step in installing my GOtv decoder?
The first step is to connect the antenna to the decoder. You can do this by inserting the RF cable from the antenna into the RF input port on the decoder.
How do I connect the GOtv decoder to the TV set?
You can connect the decoder to your TV using an RCA cable. Simply plug one end of the RCA cable into the RCA output port on the decoder, and the other end into the RCA input port on the TV.
What do I do after connecting the decoder to the TV?
Once you have connected the decoder to the TV, you need to turn on the TV and the decoder. Follow the on-screen prompts to complete the setup process.
What if I encounter any issues during the installation process?
If you encounter any issues during the installation process, you can refer to the GOtv installation manual or contact the GOtv customer care for assistance.
How long does it take to install a GOtv decoder?
The installation process should take no more than 15 minutes to complete.
Can I install my GOtv decoder myself, or do I need a technician?
You can install your GOtv decoder yourself, as long as you follow the instructions carefully. However, if you encounter any issues or difficulties, you can contact a GOtv technician for assistance.
Can I use my existing antenna to receive GOtv signals?
It depends on the type and quality of your existing antenna. GOtv requires a UHF antenna, so if your existing antenna is not a UHF antenna, you may need to replace it to receive GOtv signals.